铁框方桶规格尺寸|吨水规格尺寸

技术数据(Technical data):
公称容积(Nominal capacity)1000升(Litre)
满口容积(Brimful capacity)1050升(Litre)
长度(Length)1200毫米(mm)
宽度(Width)1000毫米(mm)
带托盘高度(Height with pallet)1160毫米(mm)
进料口直径(Filling opening)150毫米(mm)
放料口直径(Discharge opening)50
毫米(mm)叉车开口(Fork opening)100
毫米(mm)标牌(Lable plate)1-2块(Piece)
护角(Corner protector)4块(Piece)
内容器重量(Inner container weight)14.5-15.5千克(kg)
总重量约(Total approx)57.5千克(kg)
复合中型散装容器容器IBC
结构(Structure):
外部框架(Outer frame):异形钢管连同底部托板和顶部拉杆(连同承托)一起组成了方形网格箱体,前后都可以安装标牌
The special-shaped steel tube, together with the bottom supporting plate and the top tie rod (together with the supporting rod), forms a square grid box body, and the plates can be installed before and after
材质(Material):框架/底板(frame/Chassis):钢质Steel,镀锌 galvanized
护角(beam):4块,由高密度聚乙烯(HDPE)制成,黑色
4 blocks, made of high density polyethylene (HDPE), black
内容器(Container):由高密度聚乙烯制成的方形吹塑容器,在容器顶部中央有灌装口,底
部前方安装有放料口
A square blown container made of high density polyethylene with a filling port in the center of the top and a feeding port at the front of the bottom
材质(Material):高密度聚乙烯(HDPE),本色Benss
灌装口(Irrigation mouth): 公称直径150毫米,带有外螺纹,采用螺纹盖密封
Nominal diameter 150mm, with external thread, sealed with screw cap
公称直径150螺纹盖:高密度聚乙烯(HDPE),红色Nominal diameter 150 thread cover: HDPE, red
材质(Material):密封圈Sealing ring:TPE
阀门(Valve):公称直径50毫米的焊接式球阀,装有红色手柄。阀门出口采用聚乙烯 铝箔复合膜密封,手柄用螺丝锁闭
Nominal 50 mm diameter welded ball valve with red handle. The valve outlet is sealed with polyethylene aluminum foil composite film, and the handle is screwed shut
材质(Material):球阀Ball valve:高密度聚乙烯(HDPE),本色Benss 公称直径50螺纹盖: 高密度聚乙烯(HDPE)
Nominal diameter 50 thread cover:HDPE
托盘(Pallet):钢质框架式托盘Steel frame tray(1000*1200mm),4面进叉4 surface into the fork
材质(Material):钢质Steel,镀锌 galvanized
供货状态(Delivery status):可立即用于灌装Can be used immediately for filling UN危险品运输标记(dangerous goods transport marking):UN 31HA1
执行标准(Execution standard):GB/T19161--2016
以下为阀门寸图:
